Once the programme is running, all the
other programmes are blocked.
If the programme selector is then
turned to another programme, the
values shown in the display will go out.
The values can be seen again if the
programme selector is turned back to
the position of the programme currently
in operation.
During a programme, you can switch
between the following displays:
–the current temperature,
–the elapsed programme duration and
– the current block:
1 = Pre-wash 1
2 = Pre-wash 2
3 = Main wash 1
4 = Main wash 2
5 = Chemical disinfection*
6 = Rinse 1
7 = Rinse 2
8 = Rinse 3
9 = Rinse 4
10 = Final rinse 1
11 = Final rinse 2
12 = Drying 1
13 = Drying 2
^Press ßto switch between the
displays.
* Wash block 5 (normally for chemical
disinfection) can be programmed in as
an additional programme stage in freely
programmable Programmes A,Band
C. It is then not possible to dispense
chemical disinfection agents.
The programme sequence indicator l
will light up when block 5 is active.
Programme sequenceindicators
The indicator light for the current
programme stage lights up during the
programme:
kReactivation
IPre-wash1+2
lMain wash1+2*
HRinses1-4/
Final rinse1+2
cDrying
rEnd of programme
(Programme parameters have
been achieved)
Operation
37