,Only use agents formulated
specifically for use in washer-
disinfectors and make sure you
follow the manufacturer's
instructions. Pay particular attention
to information regarding toxic
residues.
Adding rinsing agent
The dispensing of rinsing agent in
the final programme block via
DOS 2 has to be activated by a
Miele service technician.
Rinsing agent is necessary to ensure
water does not cling and leave marks
on items, and to help items dry faster
after they have been washed.
Because residues of rinsing agent
remain on the surface of items after
they have dried, it is important to check
the suitability of the rinsing agent being
used.
Rinsing agent is poured into the
storage reservoir, and the amount set is
dispensed automatically.
The rinsing agent reservoir holds
approx. 180 ml.
,Only fill the rinsing agent
reservoir with rinsing agent
formulated for washer-disinfectors.
Do not fill it with cleaning agent.
This would damage the reservoir.
^Open the door fully.
^Undo the screw cap.
^Add rinsing agent until the level
indicator is dark (see arrow in the
illustration). Use a funnel if
necessary.
^Screw the cap back on.
^Mop up any spilt rinsing agent. This
prevents over-foaming occurring
during the next programme.
Dispensing chemical agents
30