Problem Possible cause Remedy
The windicator starts
flashing before the
start of a programme.
The programme
cannot be started.
Before trying to rectify the
problem, you must:
–Turn the programme
selector to f(the fault
code goes out).
–Switch the machine off with
the I-0 switch.
Fault code: Fdo:
The neutralising agent
container is empty.
Fill the container with
neutralising agent or replace
it with a new, full container.
Then:
–Switch the machine on.
– Start the programme
again.
A few minutes after the
start of a programme,
the windicator flashes
and the programme is
cancelled.
Before trying to rectify the
problem, you must:
– Turn the programme
selector to f(the fault
code goes out).
– Switch the machine off with
the I-0 switch.
Fault code: Fdo:
Fault with the system for
dispensing neutralising
agent.
Fill the container with
neutralising agent or replace
it with a new, full container.
Vent the dispensing system;
see "Programmable
functions".
Then:
–Switch the machine on.
–Start the programme
again.
Problem solving guide
60