Service
This washer-disinfector should be
serviced in accordance with local and
national safety regulations after every
1000 operating hours, or annually by
a Miele approved service technician.
A service will cover the following:
–Electrical safety tests
–Door mechanism and door seal
–Any screw connections and
connectors in the wash cabinet
–Water inlet and drainage
– Internal and external dispensing
systems
– Spray arms
– Filter combination
– Sump including drain pump and
non-return valve
– All baskets, inserts and modules
–Drying unit
and where applicable:
–Steam condenser
–Any printer connected to the
machine.
The following operational tests will be
carried out within the framework of the
maintenance:
–A programme will be run as a test
run
–Thermo electrical measurements will
be taken
–Seals will be tested for water
tightness
–All relevant measuring systems will
be safety tested including fault
indications.
Maintenance
50