The following guide may help to find the reason for a fault and enable you to
correct it. You should, however, note the following:
,Repairs should only be carried out by a Miele authorised and trained ser-
vice technician in strict accordance with current local and national safety
regulations. Unauthorised or incorrect repairs could cause personal injury or
damage to the machine.
To avoid unnecessary service call-outs, check that the fault has not been caused
by incorrect operation.
To do this:
^Turn the programme selector to f(the fault code goes out).
^Switch the machine off with the On/Off switch I-0.
^Switch the machine on again and reselect the programme.
^If the problem occurs again and cannot be remedied, please contact Miele.
^Quote the fault code "F...".
Problem Possible cause Remedy
The washer-disinfector
is not switched on.
The door is not properly
closed.
Close the door firmly.
The appliance is not
plugged in.
Plug it in and switch on at the
socket.
The fuses are defective or
have tripped.
Reset the fuses.
(Minimum fuse rating: see
data plate).
The machine is not
switched on.
Press the I-0 switch and
select a programme.
The machine is not
switched on.
Fault code:
F04-F17,F20-F26,
F28-F--
Call Miele Service.
Fault code: F31-33 There is a fault with the
controls for the dispensing
system.
Call the Miele Customer
Contact Centre.
Problem solving guide
58