The washer-disinfector is capable of
documenting processing procedures
(process documentation).
Process documentation can be carried
out either by using documentation
software or via a printer.
To do this the washer-disinfector is
fitted with a serial interface located at
the rear of the machine.
The interface must be configured by
a Miele Service technician.
Process documentation using
documentation software
The process documentation is
transferred using external
documentation software for digital
archiving.
Process documentation using a
report printer
The process reports are printed on a
report printer connected to the machine
and then archived in paper form.
Only use data terminals (e.g.
printers) which are certified in
accordance with EN/IEC 60950.
A report containing the following data
will be produced during a programme
sequence:
–Date and machine number
–Programme start and programme
name
–Blocks used in the programme
–Dispensing system with dosage
temperature and where appropriate
dosage amount
–Target values for temperature and
temperature holding times
– Minimum temperature during the
temperature holding time
– All faults (e.g. Water inlet fault)
– Programme end
– Messages, e.g. insufficient salt
Reports can be produced in German,
English, French, Italian and Spanish.
Please contact Miele if you require
further information about suitable
printers and software.
Process documentation49