Programme Application
A
CUSTOMER
Freelyprogrammable programme : programmed by a Miele authorised service
technician;factory-set parameters as for UNIVERSAL programme.
B
INORGANIC
Forthe removal of inorganic residues;
generalanalysis and water analysis and aqueous nutrients with acid-soluble
metallicsalts such as Ca2+, Mg2+ etc, suitable for low to medium soiling levels
andfor medium to high quality rinse requirements.
C
ORGANIC
Forremoving organic residues such as oils, fats, wax, agar. Not suitable for
acid-solubleresidues (e.g. metallic salts, amines), for medium to high soiling
levelsand for medium rinse requirement. Requires liquidcleaning agent: Hot,
coldand AD water connections recommended.
D
STANDARD
Simpleprogramme for varied soiling, not suitable for denaturing and acid-soluble
residuessuch as proteins, metallic salts and amines, for low level soiling and low
rinserequirements.
E
UNIVERSAL
Forthe removal of organic residues such as protein, oil, certain types of grease,
andfor certain inorganic residues (pH 7 water-soluble metallic salts). Suitable for
preparationand analytical applications with low to medium levels of soiling and
mediumquality rinse requirements.
F
INTENSIVE
Forthe removal of organic residues such as protein, oil, cell and tissue culture,
oilsand certain types of grease (pH 7 water-soluble metallic salts). Suitable for
preparationand analytical applications with medium to high levels of soiling and
mediumto high quality rinse requirements.
G
PLASTIC
Fortemperature sensitive laboratory equipment e.g. plastic bottles (temperature
resistantto at least 55ºC). Suitable for preparation and analytical applications with
lowto medium levels of soiling and medium quality rinse requirements.
6
DRAIN
Todrain soiled water from the machine, e.g. after a programme has been
cancelled.If applicable, observe regulations on containing the spread of
epidemics- see "To cancel a programme".
D
PRE-RINSE
Forrinsing heavily soiled items (e.g. for removing soiling or disinfectant residue,
orto prevent soiling drying on to dishes when a complete programme does not
yetneed to be run).
varioTD Complieswith general hygiene regulations. 90°C (+5 °C, 0°C) programme with a
5-minuteholding time, in accordance with the requirements of EN ISO 15883-1.
SPECIAL
93°C-10’
Forcleaning and thermal disinfection at 93°C with a 10 minute holding time, area
ofeffectiveness A/B range, in accordance with § 18 IfSG.
ProgrammesA to G and vario TD can be optimised to specific requirements on request by Miele Ser-
vice.
*Organic residues such as oils and fats may require conversion to oil-resistant elastomers.
**The dispensing of rinsing agent with DOS 2 must be activated by a Miele service technician.
Programme overview
78