Cleaning the control panel
^The control panel should only be
cleaned using a damp cloth or with a
proprietary cleaning agent for glass
or plastic surfaces.
An approved and listed disinfecting
agent can be used to wipe surfaces.
,Do not use abrasive cleaners or
all-purpose cleaners.
Because of their chemical
composition they could cause
serious damage to plastic
components.
Cleaning the front of the
machine
^The front should be cleaned using a
damp cloth and a small amount of
washing-up liquid, or with a
non-abrasive proprietary cleaning
agent designed for use on stainless
steel.
^To help prevent resoiling
(fingermarks etc.) a stainless steel
conditioning agent (available from
the Miele Spare Parts Department or
via the internet on
www.miele-shop.com) can also be
used.
,Do not use any cleaning agents
containing ammonia or thinners as
these can damage the surface
material.
,Never clean the machine or near
the vicinity with a hose or a pressure
washer.
Cleaning the wash cabinet
The wash cabinet is generally
self-cleaning.
However, should a build-up of deposits
occur in the cabinet please contact
Miele for advice.
Cleaning the door seals
The door seals should be cleaned
regularly with a damp cloth to remove
any soiling.
Seals which are no longer tight or which
have suffered damage must be
replaced with new ones by an
approved Miele technician.
Dispensing systems
When processing chemicals are being
used, they should be monitored
regularly for any dispensing
irregularities.
Maintenance
55