For future servicing work, please document any alterations to the factory
default settings.
Enter any alterations in the appropriate box.
General notes:
–Switch positions that have not been allocated a function are indicated in the
middle part of the display by a bar ( -).
–The programming level is called up via the fposition.
It is shown as E.. in the display.
–When processing medical devices, any changes made to programmes or
dispensing systems must be documented in a log book kept with the machine
(in accordance with the Medical Devices Directive). The machine's cleaning
and disinfecting standards must be re-validated.
The following applies to all programmable functions:To activate programming mode
^Turn the programme selector to f.
^Switch off the machine.
^Press and hold in ßand 6at the
same time, and, whilst doing so,
press the I-0 switch.
The current programme version P.. will
appear in the display. The p/6
indicator light comes on.
To save values and exit from programming mode
^Press 6.SP will appear in the display.
^Press 6again. The alteration is now saved.
To exit from programming mode without saving
^Switch the machine off with the I-0
switch.
The alteration will not be saved.
Programmable functions
40