Warning and Safety instructions
Before connecting the appliance, make sure that the connection data on the data plate (voltage and rated load) match the mains electricity supply. This data must correspond in order to avoid the risk of damage to the appliance. Consult a qualified electrician if in doubt.
Do not connect the appliance to the mains electricity supply via a multi- socket unit or an extension lead. These do not guarantee the required safety of the appliance (e.g. danger of overheating).
For safety reasons, this appliance may only be used when it has been fully installed.
Never open the housing of the appliance.
Tampering with electrical connections or components and mechanical parts is highly dangerous to the user and can cause operational faults.
While the appliance is under warranty, repairs should only be undertaken by a service technician authorised by the manufacturer. Otherwise the warranty will be invalidated.
During installation, maintenance and repair work, the appliance must be disconnected from the mains electricity supply. It is only completely isolated from the electricity supply when:
–the mains fuse is disconnected,
–the
–or it has been switched off at the isolator or at the wall socket and the plug has been withdrawn.
Faulty components must only be replaced by genuine Miele original spare parts. The manufacturer can only guarantee the safety of the appliance when Miele replacement parts are used.
If the connection cable is damaged, it must be replaced by a Miele approved service technician.
This microwave compact oven must not be installed and operated in mobile installations (e.g. on a ship).
7
