Miele H 5040 BM, H 5030 BM Problem solving guide, Possible cause and remedy

Problem solving guide

Problem Possible cause and remedy

A noise is heard after a programme has finished.

The cooling fan continues to run for a while after the oven has been switched off to prevent any humidity building up in the oven, on the control panel or on the oven housing unit. When the temperature has fallen sufficiently, the fan switches off automatically.

An abnormal sound can Check if there are sparks caused by using metal dishes

be heard when the	(see "Suitable containers for microwave ovens").
oven is operating in	Check if the food is covered with aluminium foil.
microwave mode.
	Remove the foil.
	Check if the rack is inside the oven.
	Always use the glass tray when using the oven in
	Microwave solo mode.
The microwave works	Check if the halogen lamp is defective.
and the oven heats up,	If so, it needs to be replaced as follows.

but the interior lighting
		Disconnect the appliance from the electricity supply
does not come on.
		(switch off and unplug at the socket, or remove the
		fuse, or switch off at the isolator as appropriate).
		The lamp cover consists of two parts: a glass piece
		and a mounting.
		Hold the lamp cover securely when removing it so
		that it doesn't fall. Place a tea towel over the floor of
		the oven and the open door to protect them.
	￿ Remove the screw to the lamp cover using a T20 torx
		screwdriver, and take off the cover.
	￿ Pull the halogen lamp out.

68