Miller Electric Auto Axcess 675 manual Peripheral Receptacle Functions, Socket Information

3-10. Peripheral Receptacle Functions

D C B

A

E L

M

FK

H J

Function	Socket	Socket Information
	A	Not used.
	B	Not used.
	C*	Circuit common.
Purge	D	Contact closure to C completes 40 volts dc
		solenoid circuit to purge shielding gas line.
	E	Contact closure to F indicates coolant flow switch is
Coolant Flow		closed and recirculating coolant system is
		operational.
Switch Input
Signal
	F*	Circuit common.
Jog	H**	Contact closure to circuit common advances
		welding wire at wire drive assembly.
Retract	J**	Contact closure to circuit common retracts welding
		wire at wire drive assembly.
	K	Contact closure to L energizes Touch Sensor
		circuitry.
Touch Sensor ON	L*	Circuit common.
And Output Signal
	M	Part touched +24 volts dc output signal referenced
Ref. 802 915-A		to circuit common.

*Circuit common is same electrical reference point.

**Speed of Jog + (advance) and Jog − (retract) is 60 ipm for 3 seconds, then it automatically changes to 700 ipm.

Note: A customer supplied matching amphenol plug, factory Part No. 194 847, [Amphenol Part No. 97-3106A-20-33P(B)(621) and strain relief clamp 97-3057-12(0621)] is required to use peripheral receptacle.

OM-201 540 Page 17