Miller Electric Auto Axcess 675 manual Front Panel Switches, Robot Abbreviations, Xxxx Robot Type

	Table 4-2. Robot Abbreviations
Manufacturer		Robot Abbreviation
ABB		ABB
Fanuc		FANU
Daihen		DAHN
Kawasaki		KAWA
Kuka		KUKA
Comau		COMU
Hitachi		HCHI
Nachi		NCHI
Panasonic		PANA
Motorman		MOTO
Robot Adapter		DTEC
Detect Disabled		OFF
None		Robt DTEC

4-4. Front Panel Switches

6

3

1 4

8

5

9

1Power Switch Turns unit On or Off.

The power-up sequence may last up to 30 seconds before the unit is ready to weld. During power-up, the front panel will display messages indicating the status of the unit. The first message is:

NET

WAIT

NET WAIT is an abbreviation for ”network updating” and means the internal control network is powering up. The next message is

XXXX(Robot Type)

XXXXidentifies the robot adapter being used as identified by the unit (see Table 4-2for a list of robot adapters that could be displayed). To ensure proper operation of the system, verify the robot displayed corresponds to the actual robot being used. The final message is

2

AUTO 675

AUTO 675 indicates the software being loaded.

2 Contactor LED

Contactor LED illuminates when weld output is energized.

3 Purge Push Button

Press button to purge gas line.

4 Gas LED

Gas LED illuminates when Purge push button is pressed.

5Jog Push Button Press button to jog wire.

7

Ref. 802 914-A

6 Wirefeed LED

Wirefeed LED illuminates when wire feeds or retracts.

7 Retract Push Button

Press button to retract wire. Wirefeed LED illuminates when Retract push button is pressed.

Auto-Threading feature is activated by pressing the Jog and Retract buttons simultaneously. Pressing the Jog, Purge, or trigger switch will turn off the Auto-Threading feature.

8PDA Port

9PC Port

OM-201 540 Page 26