Operator's guide
the file, or the Linux info documentation for mgetty.
4.5 Data transfer
You may retrieve data from the DCM using a variety of standard seismic protocols and formats. In addition, the DCM includes facilities for communicating with Gür alp Systems' own Scream! PC software. The options on this set of pages allow you to configure the DCM to use these additional methods.
Scream!
Scream! is a Microsoft Windows software package designed to configure and retrieve data from Gür alp digitizers. The options on this page allow you to control how the DCM responds to requests from Scream!. Depending on your requirements, the DCM can act either as an instrument in itself, or pass through requests directly to connected equipment.
datatransfer.scream.server : Select on to allow Scream! to connect to the module over a TCP/IP connection and receive data as if it were a connected instrument. The connection can be established over an Ethernet, wireless, or
PPPlink. If you do not want to transfer data directly to Scream! clients, select
off.
datatransfer.scream.server.allowserialaccess : The Scream! software allows you to configure digitizers connected to it by serial links. Select yes if you want to be able to use Scream! to configure digitizers attached to the DCM's serial ports. The software is able to differentiate between several instruments connected to the DCM, so enabling this option will allow you to configure all attached digitizers from within Scream!.
December 2005 | 55 |
