CMG-DCM

will be several sender pages, all with the same options.

datatransfer.cd1.sender : Select on to activate the CD1.0 sender. If you do not want the DCM to transmit CD1.0 data, select off and ignore the remaining settings.

datatransfer.cd1.sender.sitename : The CD1.0 site name for the DCM.

datatransfer.cd1.sender.receiver : The IP address or hostname of the remote CD1.0 device.

datatransfer.cd1.sender.port : The network port number to which the DCM will send CD1.0 data.

datatransfer.cd1.sender.compression : Select on to enable Canadian compression in the outgoing data stream.

datatransfer.cd1.sender.channel.x : The DCM needs to know the CD1.0 channel name for each of the streams you want to transmit. When data comes in on a stream that the DCM recognizes, it will send it on with this new name. You can set up to 12 channels to be transmitted by one CD1.0 sender.

CD1.1

The CD1.1 format is an evolution of CD1.0 used by many NDCs, using different settings from CD1.0. The DCM has a separate transmitter for this format.

datatransfer.cd1_1.tx : Select on to instruct the DCM to provide data in this format. If you do not want the DCM to transmit CD1.1 data, select off and

58

Issue A

Page 58
Image 58
Minicom Advanced Systems CMG-DCM manual CD1.1