CMG-DCM
control attached digitizers using its own interface.
4.4 Network configuration
These settings must be provided if you intend to connect a DCM to a TCP/IP network, whether over a serial link via PPP, or using Ethernet or wireless connections.
Ethernet port
The settings described below begin net.eth.0 because they refer to the first Ethernet interface. If the optional 802.11b
net.eth.0 : If you know the IP address the DCM is going to use over this interface, you should set this option to static and fill in the details below. Alternatively, you can select dhcp/bootp and have the DCM automatically request an address over the network. If you choose the dhcp/bootp option, you should ensure that a gateway computer exists on your network that can receive these requests, and that the DNS (nameserver) entry for the DCM is kept current. You can then ignore the remaining settings on this page.
net.eth.0.address : If the above option is set to static, you should fill in the IP address of the interface in this box. Valid IP addresses consist of four numbers between 0 and 255, separated by periods. If you intend to attach the DCM to a private network, you should use an IP address in one of the private ranges (10.b.c.d;
46 | Issue A |
