CMG-DCM

Retrieving data from a DCM's disk can be done by plugging it into a computer compatible with the USB or FireWire mass storage standards. Disks can be swapped at any time with no risk to data.

A stand-alone DCM can also be supplied in a form factor suitable for mounting in a standard 19” rack. Such a DCM will normally come equipped with eight additional serial ports TTS0-7, and an optional State of Health (SOH) interface for monitoring or tamper evidencing.

Up to four modules may be mounted side-by-side in a 19” rack.

An integrated or modular DCM may be combined with a digitizer and seismometer to produce a single unit capable of measuring seismic data, storing, and passing it on over a network:

6

Issue A

Page 6
Image 6
Minicom Advanced Systems CMG-DCM manual Cmg-Dcm