Mitel MITEL 5603 Subscribe Handset in IP-DECT System Manually, Unsubscribe System, Rename System

Navigate the Menu

Subscribe Handset in IP-DECT System Manually

To subscribe an IP-DECT system manually, the “Park:” (Portable Access Right Key) and “Ac:” (Authentication code) related to the system are needed. Contact the system administrator for more information. If the handset subscribes to an additional system, it must also be added manually.

Note: The PARK code may not be required if there is no alien DECT system within the coverage area.

The IPEI/IPED code is a unique code which has been assigned to the handset. See also “Admin Menu” on page 47.

1.Select "System".

2.Select "Subscribe".

3.Enter System name (optional). If no system name is entered, the default name will be used. That is System A, System B, depending on which system name is free.

4.Press "Next".

5.Enter PARK code (max. 31 digits). The PARK code may not be required if there is no alien DECT system within the coverage area.

6.Enter AC code. Press "Next".

An information text "Protection on?" appears.

7.Select "Yes" if the new system needs to be protected. It is not possible to delete a protected subscription from the System menu1.

8.Press "OK". A searching mode starts.

Unsubscribe System

1.Select "Unsubscribe"1.

2.Select the system to unsubscribe in the list.

3.Press "Select".

4.Press "Yes" to unsubscribe the system. Otherwise, press "No".

Rename System

You can change the name of the system in the handset.

1.Select "Rename System".

2.Select the system to rename.

3.Press "Edit"

4.Enter new name.

5.Select "Save".

1.It is not possible to unsubscribe a protected system via the System menu. The unsubscripiton must be made via the Admin menu or the DECT system.

45