Mitsubishi Electronics CS-35305 manual Procedure

TV + cable with a decoder box

equipment you will need

Use this hook-up if you need a decoder box to descramble cable channels. When you complete this hook-up, you should set up your remote control to operate your cable box (see page 38).

To complete the hook-up, you'll need:

•One length of 75 ohm coaxial cable.

procedure

OConnect the incoming cable to the IN terminal on the decoder

box.

OConnect the coaxial cable to the OUT terminal on the back of the decoder box; connect the other end of this cable to the antenna terminal on the back of the TV.

Incoming Cable

I

0

Cable Decoder Box

Rear Terminals

IT

TV Rear Terminals

0

VHF/UHF 75_)

----* _)

26 Chapter 2: Connecting Your TV