Mitsubishi Electronics CS-35305 manual Setting up the remote control to operate y,ur VCR

Using the remote control to operate cable boxes

and other brands of VCRs

operating Mitsubishi components

This TV's remote control comes programmed to operate Mitsubishi TVs and VCRs. The select buttons (across the top of the remote )

determine which component the remote control will operate.

The following buttons are available when usi_g this TV:

•	power	button		•	audio		and	video controls
•	pause	button		•	menu		button
•	mute control			•	cancel		button
•	super	quick	view button	•	display		button
•	quick	view	button	•	home	button
•	volume	control		•	off-timer			button
•	input	button		•	number		bu_tc,ns
•	channel	control		•	PIP	controls
•	enter	button		•	VCR	buttons
operating		VCRs or cable		boxes	from		other manufacttvrers

The remote control is pre-set to operate Mitsubishi VCRs, but it

can also operate VCRs from other manufacturers as well. If you

have a VCR from another manuihcturer, or if y,_u have a cable box, you should "set up" the remote control.

Each layer on the remote control (CABLE, VCF.-A, or VCR-B) can be set for either a cable box or a VCR.

setting up the remote control to operate y,_ur VCR

O Turn off your VCR.

Press one of the select buttons across the top of the remote control to choose the layer that you want to "set up." You can choose between VCR-A, VCR-B or CABLE.

O While holding in the POWER button on the remote control, enter the code number listed in the chart on the following page for your brand of VCR. Be sure to enter both digits of th,e code number. If more than one number is listc,d, try the first one.

Release the POWER button.

Press the POWER button again. Your VCR should turn on. If the VCR turns on, your remote control is now "set up" correctly.

If your VCR does not turn on, repeat the instructions, trying each code number listed for your brand of VCR. If none of those code numbers work, try each number, 01 through 20.

38 Chapter 3: Operating Your TV