User’s Manual

Panic Button

Pressing the PANIC button activates panic recording, so the DVR will record video regardless of the time-lapse or event recording schedule. Press the button again to release the panic recording.

NOTE: When the DVR is in the Panic recording mode, the REC LED flickers and displays on each camera screen.

Camera Buttons (1 to 4)

Pressing the individual camera buttons will cause the selected camera to display full screen. They are used to enter passwords. The camera buttons also function in the PTZ mode. Pressing CAMERA 1 zooms in in the PTZ mode, and pressing CAMERA 2 zooms out in the PTZ mode. CAMERA 3 is used to control near focus of the PTZ camera in the PTZ mode. CAMERA 4 is used to control far focus of the PTZ camera in the PTZ mode.

Quad/Sequence Button

Pressing the QUAD/SEQUENCE button toggles between quad (2x2) display mode and sequence mode. It also loads a Preset Apply in the PTZ mode.

PTZ Button

Pressing the PTZ button opens a Pan/Tilt/Zoom screen which allows you to control properly configured cameras.

In the PTZ mode, pressing the PTZ button enters the digital zoom mode, and pressing the button again in the digital zoom mode returns to the live monitoring mode. When a PTZ device is not installed, pressing the PTZ button enters the digital zoom mode directly.

Pressing the

PTZ

button in the playback mode enters the digital zoom playback mode.

NOTE: When the DVR is in the PTZ mode, a white line will display around the image.

NOTE: In the digital zoom mode and digital zoom playback mode, a bright small box is laid over the image. The box indicates the area to be enlarged.

Arrow Buttons

Arrow buttons are used to navigate through menus and GUI. They are also used to control Pan and Tilt in the PTZ mode, and to move the specific area of screen that you want to enlarge in the digital zoom mode.

In the playback mode, the Up-Arrowbutton selects the next image, and the Down-Arrowbutton selects the previous image. Pressing the Left-Arrowbutton plays video backward at high speed.

Pressing the button again toggles the playback speed from , and . The screen displays , and respectively. Pressing the Right-Arrowbutton plays video forward at high

speed. Pressing the button again toggles the playback speed from , and . The screen

displays , and respectively.

Entering Playback mode from Live Monitoring mode can be user password protected.

10

Page 20
Image 20
Mitsubishi Electronics DX-TL4U manual Panic Button, Camera Buttons 1 to