User’s Manual
NOTE: The Admin and User passwords are composed of up to eight digits using the camera buttons. The default Admin password is 4321.
CAUTION: Write down the new password and save it in a secure place. If the password is forgotten, the unit must be reset using the Factory Reset Button and all data settings will be lost.
To lock the buttons on the front panel or remote control, highlight Key Lock On and press the 
button. Once the buttons are locked, pressing any button on the front panel or remote control will cause a password screen to display. You will need to enter the correct password to unlock the keys. The Key Lock password is 4321. The Administrator password also can be used to unlock the keys.
You can save your changes by highlighting OK and pressing 
button. Selecting Cancel exits the screen without saving the changes.
Config Screen
The Config menu is used to perform functions such as switching between Quick Setup and Normal Setup, backing up video, loading default setup and clearing all data.
Figure 74 — Config screen.
Clip Copy
The Clip Copy screen can be used to back up video to an external USB hard disk drive, USB
56
