User’s Manual

Main Monitoring Setup Screen

You can adjust the display dwell time for each camera displayed on the main monitor. You also can set the video from the event-detected camera to be displayed on the main monitor during the preset dwell time.

Figure 63 — Main Monitoring Setup screen.

Highlight the box beside Sequence Dwell Time and press the button. You can adjust the sequence dwell time from 3 to 60 seconds.

NOTE: The DVR does not sequence the camera having video loss.

Highlight the box beside Event Monitoring and press the button to toggle between On and Off. When it is On, video from the lowest camera number among those connected with the event-detected sensor will be displayed full-screen on the main monitor for the preset dwell time.

Highlight the box beside Event Monitoring Dwell Time and press the button. You can adjust the event monitoring dwell time from 3 to 60 seconds.

46

Page 56
Image 56
Mitsubishi Electronics DX-TL4U manual Main Monitoring Setup screen