Mitsubishi Electronics PKH30FL Features, Models, Cooling capacity / Heating capacity, Seer

1

FEATURES

CHECK TEST

MODEL RUN SELECT

FAN

SWING

NOT AVAILABLE

˚F ˚C

STOP AMPM

START

Indoor unit

Remote controller

Models	Cooling capacity / Heating capacity	SEER
PKH18FL	18,000 / 18,600 [25,100] Btu/h	11.1
PKH24FL	24,000 / 25,000 [31,500] Btu/h	10.2
PKH30FL	30,000 / 33,000 [40,500] Btu/h	10.6
PKH36FL	34,200 / 38,000 [45,500] Btu/h	10.5

1. COMPACT DESIGN

The PKH series models have been downsized and now require such minimal wall space that they can even be installed above windows.

2. LCD WIRELESS REMOTE CONTROLLER

The new wireless remote controller has a larger easy-to-read temperature display, and executes ON/OFF commands and temperature settings with a press of the button.

3. AUTO FLAP SHUTTER

With a simple flick of the OFF switch the air outlet can be closed off with a shutter. The shutter also functions as a flap during operation to adjust the air flow angle, with “Auto Angle 1” securing a comfortable air flow.

4.INSTALLATION : FAST AND EASILY ADAPTABLE

(1)Multi-directional piping

Multi directional drain and refrigerant piping radically improves flexibility in selecting installation layouts. PKH18/24/30/36FL models boast refrigerant piping in 4 directions and drain piping in 2 directions.

(2)Back plate installation guide

The back plate installation guide gives clear instructions on installation positions. The enlarged back plate secures the unit firmly to the wall, while the support piece which lifts the unit makes left side piping work much easier.

(3)Easily removable filter and convenient wireless remote controller

The presence of thumb screws on the filters means that the filters can be quickly and smoothly removed.

5.HIGH RELIABILITY AND EASY SERVICING

In addition to the self-diagnostic function, units are also equipped with a 3-minute time delay mechanism (cooling), an auto restart function, an emergency operation function, a test run switch, etc., to assure high reliability and easy servicing.

6. NITROGEN GAS IS CHARGED TO INDOOR UNIT

Indoor unit and refrigerant pipes are charged with nitrogen gas (N2) instead of R22 before shipment from the factory.

2