Mitsubishi Electronics PKH18FL, PKH36FL, PKH24FL, PKH30FL service manual Indoor Fan Control

5. SW6 (Address selector)

1 2 3 4

ON

OFF

This switch is not available for series PKH.

6. SW7 (Model selector)

Switch to set the output of phase-controlled indoor fan motor. Address setting is available at any time.

The initial factory setting by is based on each capacity.

Service Ref.	PKH18FL				PKH24FL				PKH30FL				PKH36FL
SW7	ON				ON				ON				ON
	OFF				OFF				OFF				OFF
		1	2	3		1	2	3		1	2	3	1	2	3

7. SW8 (Option)

1 2 3 4 5 6

ON

OFF

SW8-1~2) Not for use.

SW8-3~4) Not for use.

SW8-5) Not for use.

SW8-6) OFF:For 230V power supply

ON: For 208V power supply

8.SW9 (Model selector)

12 3 4 5

ON OFF

SW9-1~5) Keep this switch.

2-10 INDOOR FAN CONTROL

Indoor fan relay output.

(a)During fan ON

The indoor fan relay turns ON. One second later, the phase control will start.

(b)During fan OFF

The phase control turns OFF. One second later, the indoor fan relay will turn OFF.

39