Mitsubishi Electronics PKH18FL Operating Procedure Photos, Removing the electrical heater

	OPERATING PROCEDURE		PHOTOS
8. Removing the line flow fan and the fan motor		Photo 7
(1)	Remove the left and right side panels.
				Screw
(2)	Remove the grilles.		Line flow fan
(3)	Remove the electrical box.			Fan motor

(4)Remove the drain pan.

(5)Loosen the screw that fixes the line flow fan to the fan

motor. (See Photo 7. )

(6) Remove the 4 screws of the motor fixture, and remove the fan motor and the motor fixture at a time (See Photo 8.)

(7)Remove the screws of the left and right motor supports, and remove the motor supports and the fan motor. (See Photo 9.)

(8)Remove the 2 screws on the left and right sides of the heat

	exchanger, and pull the bearing support toward you. (See		Photo 8
	Photo 11.)				Screws
(9) Remove the screw of the center support, and remove the						Fan motor
	support. (See Photo 10. )
(10) Pull the left-hand side of the heat exchanger toward you,
	and remove the line flow fan.
						Motor fixture
Photo 11
			Photo 9
				Fan motor			Screw
			Screw
	Heat exchanger
Bearing support
			Motor support
								Motor
								support
			Photo 10
				Line flow fan
		Line flow fan

9. Removing the electrical heater.				Center support			Screw
(1)	Remove the left and right side panels.	Photo 12
(2)	Remove the grilles.
(3)	Remove the drain pan.
			Heat exchanger
(4)	Loosen the screw that fixes the line flow fan to the fan							Heater fixing screw
					Heater	element
	motor.(See Photo 7.)
(5)	Remove the screw of the center support, and remove the
	support. (See Photo 10.)
(6)	Remove the 2 screws on the left and right sides of the heat
	exchanger, and pull the bearing support toward you. (See
	Photo 11.)

(7)Pull the left-hard side of the heat exchanger toward you, and remove the line flow fan.

(8)Remove the heater fixing screws (1 screw each on right and left sides), and slide the heater element to the left to remove the heater.

47