TV Back Panel, CableCARD Slot | Mitsubishi Electronics WD-73732

16Chapter 1. Television Overview

TV Back Panel

COMPONENT inputs 1 and 2 offered on models WD-Y57 and WD-Y65.

COMPONENT inputs 1, 2, and 3 offered on models WD-57732, WD-65732, and WD-73732.

��

�

		�
��		��
��		��
��
��
��
��	��
��	�	�
	�	�

��

10 11

	��		��
�	�	�	��
			��
			��
			��
			��

��

��	��
��	��
��
��
��

��

�	��	�	��	��
			��	��

��	��
��
��

1. ANT 1/MAIN, ANT 2/AUX (Antenna)

If you are connecting an antenna, direct cable without a cable box, or are using cable with a CableCARD™, connect the main antenna or cable source to

ANT 1/MAIN.

ANT 1/MAIN and ANT 2/AUX can each receive both digital and analog over-the-air channels from a VHF/UHF antenna or non-scrambled digital/analog cable source.

ANT 1/MAIN and CableCARD™

Use ANT 1/MAIN to receive premium subscription cable TV service authorized by the CableCARD™ access card. The CableCARD access card is provided by your local cable company. ANT 2/AUX can continue to receive over-the-air or non-scrambled cable signals when ANT 1 is used for CableCARD™ service.

2. CableCARD™ Slot

The CableCARD access card from your cable TV service provider is inserted into this slot. When inserting, ensure that the top of the card faces in the direction indicated by

CARD TOP .

If your cable company is not currently offering CableCARD access cards, use the cable box provided and authorized by your local cable company to view scrambled channels.

3. INPUT 1 and 2 Inputs

(Audio and Video)

INPUT 1 and 2 can be used to connect a VCR, Super VHS (S-VHS) VCR, DVD player, standard satellite receiver, or other A/V device to the TV. INPUT 3 is a third set

of jacks located on or near the front of the TV for conve- nience. Please note that if S-VIDEOand VIDEO are both available, you must choose to connect only one.

Mitsubishi Electronics WD-73732 TV Back Panel, ANT 1/MAIN, ANT 2/AUX Antenna, CableCARD Slot

Models: WD-73732 WD-65732 WD-57732 WD-Y57 WD-Y65