Optional | Mitsubishi Electronics WD-Y65, WD-57732, WD-73732, WD-Y57

24Chapter 2. TV Connections

VCR to an Antenna or Wall Outlet Cable

Required: Two-way RF splitter, 3 coaxial cables, right and left analog audio cables, either S-video or video cable. These are not included with the TV but are available at most electronics stores.

1.Connect the incoming cable or antenna to IN on the RF splitter.

2.Connect one coaxial cable from OUT on the RF split- ter to ANTENNA IN on the VCR back panel.

3.Connect one coaxial cable from OUT on the RF splitter to ANT 1/MAIN on the TV back panel. This connection also allows you to use the TV Guide On Screen® and Split Screen features.

4.To use the TV speakers with the VCR, connect left (white) and right (red) audio cables from AUDIO OUT on the VCR to INPUT/AUDIO LEFT and AUDIO RIGHT on the TV back panel. If your VCR is mono (non-stereo), connect only the white (left) cable.

5.Connect either an S-Video or composite video cable from VIDEO OUT on the VCR back panel to INPUT/VIDEO or S-VIDEOon the TV back panel. Connect only one type of video cable; S-Video is recommended, if available.

Optional

To use the TV Guide On Screen recording feature and to record high-definition digital channels converted to analog standard-definition video and analog stereo audio, perform these two additional steps.

6.Connect left (white) and right (red) audio cables from AUDIO IN on the VCR to MONITOR OUT LEFT/RIGHT on the TV back panel. If your VCR is mono (non-stereo), connect only the white (left) cable.

7.Connect a composite video cable from VIDEO IN on the VCR back panel to MONITOR OUT/ VIDEO on the TV back panel.

��		��
��	�	��	��	�	��
	�			�	��	��
					��	��
��	�			��
��

��

��

��

��	��	��
		��

��

��

��

��

��

��

��

��

��

�

�

�

��

��

��

��

��

��	��
��	�	�

��

��

��

	��		��
�	�	�	��
			��
			��
			��

��

��

��

��

��

��

	��	��
		��
	��	��
	��	��
		��

��

��

��

��

��

R

Figure 6. Connecting a VCR to an Antenna or Wall Outlet Cable

Image 24

Mitsubishi Electronics WD-Y65, WD-57732, WD-73732, WD-65732, WD-Y57 manual VCR to an Antenna or Wall Outlet Cable, Optional

Contents

WD-Y57aa WD-Y65 WD-57732 WD-65732 WD-73732 U T I O N For Your Records Serial Number Purchase DateRetailer Name Location Contents TV Menu Settings NetCommand FunctionsUsing the TV with a Personal Computer Appendices Demo Mode TV Guide On Screen Access RequirementsStand Requirement Standby Fan General Cleaning Precautions Top and Sides of the TVScreen Unauthorized Software Important Safeguards Read, Retain and Follow All Instructions Power Lines Page Television Overview Package Contents Special Features of Your TV NetCommand Home Network Control System Memory Card ReaderDVI-I Input for Computer Video TV Guide On Screen Interactive Program Guide System System Reset Button ResetTV Front Panel Control Panel Front-Panel Indicators Lamp IndicatorStatus Indicator POWER/TIMER Indicator TV Back Panel ANT 1/MAIN, ANT 2/AUX AntennaCableCARD Slot Input 1 and 2 Inputs IR Emitter NetCommand Component InputsHdmi 1 Do not connect a computer to either TV Hdmi jack Using a CableCARD CableCARD menu Network SetupCableCARD Technology CableCARD Menu TV Connections Picture Quality Name Signal Type Connection TypesVideo and Combined Audio/Video Connections Audio Connections Hdtv Cable Box or Satellite Receiver with Component Video Digital Video and Home RecordingConnection Type into the TV Effect on Home Recording Wall Outlet Cable no cable box Can be used with a CableCARD Antenna with a Single Lead Antennas with Separate UHF and VHF LeadsFor an antenna with flat twin leads For cable or antenna with coaxial lead VCR to an Antenna or Wall Outlet Cable Optional Connecting a VCR to a cable box VCR to a Cable Box Audio & Video Connecting an Hdmi device DVD Player with Component Video Receiver Sound System Older Cable Box Camcorder Ieee 1394 Devices Direct Device-To-Device MethodHub Connection Method Tips for Connecting Ieee 1394 Devices Ieee 1394 Camcorders IR Emitter NetCommand and TV Guide On Screen To the IR Emitter NetCommand jack on Helpful Hints for NetCommand Connections TV Setup Guidelines for Setting Up and Using Your New Widescreen TV Installing the Remote Control Batteries When You First Power On the TV Using the TV’s Setup Menu Setup Menu Setting the Clock AutomaticallySetting the Clock Manually On/Off Set Day Set TimeDevice Channel When You First Connect a Device More About Auto Input Sensing Ieee 1394 Connections Ieee 1394 Device with an Analog Connection NetCommand Specialized Device Keys Initial NetCommand Setup What You Need to Know About NetCommandInitial NetCommand Setup for Most Device Types Additional Setup Using NetCommand Menu Set Up TV Guide On ScreenReview TV Connections Add or Remove Device Keys from NetCommand Control Other Options on the NetCommand MenuSet Up NetCommand Control of an A/V Receiver To Replace One Device with Another on an Input Jack Part 1 Learn IR Codes for A/V Receiver Inputs Assign names to identify learned A/V receiver audio inputs Part 3 Tell the TV Where Connected Devices Send Audio Digital Surround SoundAudio Directly from TV Analog Audio e.g., analog VCR TV Operation and Features Remote Control OverviewRecord/Playback Keys VOL Sleep Timer Resetting the Remote ControlSetting the Sleep Timer Cancelling the Sleep Timer Using ChannelView Feature InstructionsChoosing a Program Source ChannelView Channel Listings Status Display Analog ProgramDigital Program Digital Ieee 1394 Device Split Screen OperationSplit Screen Operations Instructions PAUSE. Press Split Screen Displays TV Inputs for Split ScreenHdmi no 1080p Hdmi 1080p ‡ PC-DVI ‡ TV Signals and Display Formats Signal DefinitionsDVD Definitions TV Display Format Definitions TV Display Formats Using the Picture Thumbnail Menu Memory Card PlaybackInserting a memory card Viewing Pictures Using the Audio Playlist Menu Jpeg Picture Slide Show SetupMP3 or WMA Audio Playlist Setup Compatible Audio Files MP3 or WMAPage TV Menu Settings Remote Control Buttons 3D Graphical Menu SystemMenu Screens Menu Main Menu Input Name Menu DVDDVD2 VCR Icon Order Menu To Replace One Device with Another on an Input JackTo Remove the Icon for an Hdmi Device To change the icon order Channel Menu Terminology FAV Setup Using the Channel Menu Using FAV ChannelsFAV Setup Using Only the Remote Control FAV Channel Menu Captions Menu Font Size ColorBackground Opacity Font Parental Lock Menu Lock by Time Parental Lock MenuFront Panel Lock Parental Lock Menu Ratings Menu Other Ratings Menu Bypassing the Ratings Lock and Lock by Time Chip Signal Information TV Content CategoriesTV Ratings Analog and Digital Audio Settings Audio/Video Menu Analog-Only Audio Settings Digital-Only Audio SettingsIeee 1394 Amplifier Settings Set PerfectColor adjustments independently for each TV input Personal Computer Video Settings Contrast BrightnessPerfecTint models WD-57732, WD-65732, WD-73732 Page NetCommand Functions Power Devices On/Off Additional Functions NetCommand-Controlled Recording Time-Delayed Recording from the MenuImmediate Recording from the Menu TV Guide On Screen and the Record List Time-Delayed Recording from ChannelView Cancelling RecordingsTo Cancel a Recording in Progress To Cancel a Scheduled Recording Record Setup Default Digital Recording DeviceSetting Up Analog VCR Recordings with TV Guide On Screen Record List Direct VCR Recording from an Antenna or Cable Source Using Ieee 1394 Devices Switching Between Analog and Digital Ieee 1394 OutputsIeee 1394 Devices and the Input Selection Menu Recording to Ieee 1394 Devices TV Remote Control and Ieee 1394 Devices To Power On or Off a Compatible Ieee 1394 DevicePower REV Discs Disc Track List ScreenDisc Search by Time Copying A/V Disc Recordings NetCommand Functions Using the TV with a Personal Computer Setup Video AdjustmentsTo Remove the Computer Icon from the Input Selection Menu Connecting a Computer to the TV Computer with DVI Digital Monitor OutputComputer with Hdmi Digital Monitor Output Connecting a computer with a VGA 15-pin monitor output Computer with VGA 15-Pin Monitor Output Analog Video Adjusting Image Resolution Select Control Panel Computer Display Formats Format Standard ZoomFormat Reduced Appendix B Specifications Appendix E TroubleshootingPage Appendix a Bypassing the Parental Lock Bypassing the Parental LockDeactivating the Front Button Lock This page intentionally left blank Appendix B Specifications Inputs Description Qty Signal Type Input SpeciﬁcationsModel Projection System Lamp Reception Outputs Description Qty Output Speciﬁcations Digital InterfacesHdmi Appendix C Lamp Cartridge Replacement Lamp LifeTo Order a New Lamp Installing the New Lamp Cartridge Removing the Old Lamp CartridgeDisposal of the Old Lamp Cartridge Appendix D Programming the Remote Control Functions Available for Other A/V Devices Programming the Remote Control Method 1 Code EntryMethod 2 Code Search Code Verification Audio Lock Universal A/V Receiver Control Programming CodesAudio Ampliﬁers Brand Code Receivers Brand Code KLH CD Players Brand Code LXI Cable Boxes Brand Code NSC DVD Players/Recorders Brand Code JSI Laser Disc Players Brand Code Satellite Receivers Brand Code VCRs and DVRs Brand Code ABS STS Appendix E Troubleshooting ServiceSupport General TV Operation Symptom Remarks TV Channels Symptom Remarks TV Power On/Off Symptom Remarks Picture Symptom Remarks Indicators Symptom Remarks Sound Symptom RemarksMemory Card Reader Symptom Remarks Ieee 1394 Recording Symptom Remarks Ieee 1394 Devices Symptom Remarks Appendix E Troubleshooting NetCommand Symptom Remarks Symptom RemarksTV Guide On Screen Trademark and License Information Mitsubishi TV Software 119 Mitsubishi DLP Projection Television Limited Warranty 120 This Limited Warranty does not Cover 121 Index VCR MDEAservice@mdea.com Demo ModeSystem Reset