Chapter 5. TV Menu Settings | 63 |
NetCommand Menu, continued
To Replace One Device with Another on an Input Jack
1.Disconnect the device you wish to remove from the TV.
2.Connect the new device to the vacated jack.
3.Open the Input Name menu from the NetCommand menu.
4.Select a device name from the list for the input.
5.Open the Review screen and confirm the change.
To Remove the Icon for an HDMI Device
When you disconnect an HDMI device, the icon remains in the Input Selection menu until you choose to remove it.
1.In the Input Name menu (see figure 4), highlight the box for the disconnected HDMI input.
2.Press 
to select Off.
3.Press MENU to return to the NetCommand menu or press EXIT to close all menus.
Icon Order Menu
(no NetCommand setup required)
The Icon Order menu allows you to rearrange the device icons that appear in the Input Selection menu. Change the sequence to put frequently used icons at the start of the list. See figures 3 and 5.
To change the icon order
1.Press 
to highlight the icon to be moved and then press ENTER.
2.Press 
to drag the icon to the desired posi- tion. Press ENTER to set the new position.
