9450 Operator’s Handbook
5.Place the supply holder against the supply roll in the supply well. Make sure the supply turns freely in the well.
6.Feed the supply through the printer, as follows.
FPush the printhead lever down to close the printhead. If the printer is off, turn the knob clockwise to manually feed the supply through the supply chute.
FPush the printhead lever down to close the printhead. If the printer is on, the printer feeds the supply automatically.
7.Feed the supplies behind the support frame as shown.
On/Off
Button
Supply
Guide
Support
Frame
Supply
Holder
Supply
Knob | Printhead | |
Lever | ||
|
8.Remove labels from the backing paper.
nMake sure the supplies rest against the back wall of the printer as they exit the supply chute. If not, open the printhead and realign the supplies. Close the printhead.
