9450 Operator’s Handbook
Removing Supplies –––––––––––––––––––––––––––––––––––––––––
To remove supplies:
1.Remove the supply holder as shown.
Supply
Guide
Supply | Supply | |
Holder | ||
Chute | ||
|
Knob | Printhead |
Lever |
2.Cut or tear the supplies as close to the supply guide as possible, and remove the supply roll.
3.Push the printhead lever up to open the printhead.
cDo Not back the labels through the printhead or a supply jam may occur.
4.Turn the knob clockwise to feed the supply out the supply chute.
