Monarch 9450 manual Connecting the Communications Cable, Printer Communications

Chapter 3. Printer Communications

7.Remove the battery. Press [On/Off] while you re-connect the battery to return to normal print operations.

Connecting the Communications Cable ––––––––––––––––––––––––

To attach the communications cable:

1.Grasp the cable holder and position the connector to match the frame around the printer port.

Printer

Port

Cable

Holder

2.Insert the connector into the printer port until the connector locks into place. You may hear a click as the latch snaps into place.

3.Pull the cable holder gently to make sure it is secure.

4.Plug the other end of the cable into the host.

nDo Not carry or drag the printer by the cable. Also, remove the cable when not using the printer.

See Chapter 7, "Specifications," for cable pin definitions.

3-3