9450 Operator’s Handbook
Problem | Solution |
|
|
Print has voids or is too light. | Make sure the supplies are loaded |
| correctly. |
|
|
| Check the supplies for damage or |
| defects. Reload supplies if necessary. |
|
|
| Check the peel roller for jammed |
| supplies. |
|
|
| Check the supply type (i.e., indexed |
| or |
| Administrator set the supply type. |
|
|
| Turn the printer off and switch to a |
| fully charged battery. |
|
|
| Clean the printhead. |
|
|
Printer does not feed. | Turn the printer off and switch to a |
| charged battery. |
|
|
| Reload the supplies. |
|
|
| Verify that a label is not jammed in |
| the label path. |
|
|
| Make sure the printer is not in sleep |
| mode. Press [On/Off]. |
|
|
| Make sure no foreign matter is in the |
| supply spool. |
|
|
| Make sure the supply turns freely in |
| the supply well. |
|
|
| Make sure the printhead is closed. |
|
|
