|
| Chapter 6. Troubleshooting |
|
|
|
|
|
|
| Problem | Solution |
|
|
|
| Printer does not print. | Charge the battery. |
|
|
|
|
| Make sure the print job was correct. |
|
|
|
|
| Make sure the supplies are loaded |
|
| correctly. |
|
|
|
|
| Make sure the printhead is closed. |
|
|
|
| Printer does not start. | Make sure the battery is charged and |
|
| plugged into the printer. |
|
|
|
|
| Make sure the printhead is closed. |
|
|
|
| Slow or sluggish feeding. | Make sure the supplies are loaded |
|
| correctly. |
|
|
|
|
| Make sure no foreign matter is in the |
|
| supply spool. |
|
|
|
|
| Make sure the supply turns freely in |
|
| the supply well. |
|
|
|
|
| Check for adhesive buildup in the |
|
| feed path and on the peel blade. |
|
|
|
If you continue to have problems:
FRemove the battery, wait a few seconds and
FMake sure the battery is fully charged.
FCall Monarch at the number at the back of this manual.
