Motorola M990 manual Main Unit, Speaker

Main Unit

Figure 13: Main unit installation.

When installing the in-vehicle phone avoid positioning the main unit where it may disrupt the proper operation of the vehicle and/or its components, such as car stereo, air bags, cubbyhole, glove compartment, ashtray, lighter, gear stick, hand brake, etc.

Attach the base connector to a stationary surface of the car using the 4 screws and 4 washers. Make sure the main unit is attached in a way that is both safe and convenient for the driver or passengers to use. You may use the flexible bracket to achieve optimal positioning of the main unit.

Warning: Do not position the main unit in front of an air bag, or where it may impair the air bag performance, as the air bag might inflate in an accident and cause damage.

Verify that the control unit does not face the sun or any source of humidity, such as air conditioner vents.

When the phone is powered off, insert the SIM card into the socket at the right side of the phone.

Speaker

Install the speaker on the side of the central console, ideally alongside the legs of the passenger sitting beside the driver, as far as possible from the microphone.

Thread the speaker cable under the carpet along the floor of the vehicle.

68 – Installation Guide