Setting Up Service
Section 1A. Setting Up Service 3
Insert the bottom of the battery into the battery
area:
Insert the battery into the opening, making
sure the connectors align. Gently press down
to secure the battery.
Place the battery door over the battery opening
and slide it upward until it locks into place.
2. Press O to turn the phone on.
Your phone will turn on, search for Sprint service,
and enter standby mode.
If your phone is not yet activated, or if it is locked,
see “Activating Your Phone” on page 4 for more
information.
3. Make your first call.
Use your keypad to enter a phone number.
Press N.
Note Your phone’s battery should have enough charge for
your phone to turn on and find a signal, set up your
voicemail, and make a call. You should fully charge
your battery as soon as possible. See “Charging the
Battery” on page 19 for details.