MSI MS-9246 manual 2-21, Cable Arm Optional, System Hardware

System Hardware

Cable Arm (Optional)

An optional cable arm is available to help tidy the system cables up.

The cable arm attaches to the rear of the server and the system rack, allowing cables to move as the server slides back and forth within the rack cabinet.

1.First screw the right rack rail to the rack. Go check the right rail on the rear (virtually the left rail if viewed from the rear of the cabinet) and you’ll find the cable arm holder at the end of the rail. Insert the clip (the narrow end) of the cable arm into the cable arm holder and push it forwards until you hear a ‘clip’ sound.

2.At the other end of the cable arm are two holes. Align the holes of the cable arm with the tabs on the rack rail (as indicated by circles and arrows).

3. Fit the tabs into the holes.

2-21