MS-9246 1U Rackmount Server
Chassis Rails
1.The chassis rails and rack rails have been as- sembled together beforehand. The first thing to do with the rail set is to take the chassis rails off the rack rails.
Note: The chassis rail engraved with “RIGHT SLIDE” on the inner side should be screwed to the right side of the chassis whereas the “LEFT SLIDE” should be screwed to the left side.
2.Pull the chassis rail gently out until the locking tab locks the rail.
3.Simultaneously press down the locking tab and pull out the chassis rail. The chassis rail should slide easily off the rack rail.
4.Follow the same procedures to disassemble the second chassis rail.
Note: The chassis rail is designed with a locking tab which can (1) hold the system firmly to the rack, and (2) lock the system halfway without sliding out of the rack rails.
