BIOS Setup
BIOS Redirection Port
This feature selects the serial port to use for Console Redirection. [Disabled] completely disables Console Redirection. Setting options: [Disabled], [Serial Port A].
Baud Rate
It allows you to select delay befor key repeat. Options: [300], [1200], [2400], [9600], [19.2K], [38.4K], [57.6K], [115.2K].
Flow Control
The Flow Control has to be enabled when EMP is sharing the same serial port as Console Redirection. The Flow Control must be set to [CTS/RTS] or [CTS/RTS+CD] depending on whether a modem is used. Options: [None], [XON/XOFF], [CTS/ RTS].
Console Type
This feature allows you to enable the specified console type. Options: [VT100], [VT100, 8bit],
FIFO Level
This feature allows you to enable the specified FIFO level. Options: [Level 4], [Level 14].
Console Connection
This feature indicates whether the console is connected directly to the system or a modem is used for connection. Options: [Direct], [Via modem].
Continue C. R. after POST
Selecting [On] will enable Console Redirection after OS has loaded. Options: [On], [Off].
# of Video Pages to Support
This setting controls the number of video pages to allocate for Console Redirec- tion when video hardware is not available.
