BIOS Setup
Security
This section lets you set security passwords to control access to the system at boot time and/or when entering the BIOS setup program. It also allows you to set virus protection at hard disk boot sector.
PhoenixBIOS Setup Utility
Main | System Summary | Advanced | IPMI | Security |
Boot Exit
Supervisor Password Is | : | Clear | |
User Password Is | : |
| Clear |
Set Supervisor Password | : | [Enter] | |
Set User Password | : |
| [Enter] |
Password on boot | : |
| [Disabled] |
Fixed disk boot sector : |
| [Normal] | |
Item Specific Help
F1 Help | ↑↓ Select Item | F9 Setup Defaults | |
Esc Exit | ↔ Select Menu | Enter Select8 | F10 Save and Exit |
|
|
|
|
Supervisor Password Is/User Password Is
It shows the preset supervisor/user password. (read only)
Set Supervisor Password/Set User Password
Enabling Supervisor Password requires a password for entering Setup. The pass- words are not case sensitive. Pressing <Enter> at either Set Supervisor Password or Set User Password displays the following message:
Set Supervisor Password
Enter New Password: | [ | ] |
Confirm New Password: | [ | ] |
Type the password and press <Enter>. Repeat.
