MS-9246 1U Rackmount Server
SCSI Device Configuration |
|
|
|
| ||||
SCSI Device ID | #0 | #1 | #2 | #3 | #4 | #5 | #6 | #7 |
Sync Transfer Rate (MB/Sec) | 320 | 320 | 320 | 320 | 320 | 320 | 320 | 320 |
Packetized | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
QAS | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
Initiate Wide Negotiation | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
Enable Disconnection | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
Send Start Unit Command | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
BIOS Multiple LUN Support | No | No | No | No | No | No | No | No |
Include in BIOS Scan | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
SCSI Device ID | #8 | #9 | #10 | #11 | #12 | #13 | #14 | #15 |
Sync Transfer Rate (MB/Sec) | 320 | 320 | 320 | 320 | 320 | 320 | 320 | 320 |
Packetized | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
QAS | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
Initiate Wide Negotiation | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
Enable Disconnection | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
Send Start Unit Command | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
BIOS Multiple LUN Support | No | No | No | No | No | No | No | No |
Include in BIOS Scan | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
|
|
|
|
|
|
|
|
|
Sync Transfer Rate (MB/Sec)
The field allows you to specify the maximum synchronous data transfer rate depending on the type of each SCSI device. Select [ASYN] to enable asynchro- nous negotiation for some older SCSI devices.
Packetized
When enabled, this option is supported by the device drivers. However, this option is not supported by the BIOS.
QAS
When enabled, this option is supported by the device drivers. However, this option is not supported by the BIOS.
Initiate Wide Negotiation
When set to [Yes], the field allows wide SCSI hard drives to use
Enable Disconnection
This field tells the SCSI controller whether or not to allow the specified SCSI device to disconnect during an I/O transfer operation. The disconnection ability frees the SCSI bus to allow other I/O processes and thus optimizes the SCSI bus performance. Setting options: [Yes], [No].
