RouteFinder MTASR1-100 User Guide
MTASR1-100
36
Point-to-Point Setup
The PPP Port Setup dialog box controls the WAN port protocol, dial on demand, and remote port
setup. The WAN port protocol can be either Point-to-Point Protocol (PPP) or Serial Line Internet
Protocol (SLIP). Of these two protocols, PPP is the more robust as it allows the end-points to
negotiate the use of the link and protocol parameters in a standardized way and also allows for
standardized encapsulation of the packets. SLIP is an older protocol which requires manual
authentication using a script.
PPP is the default protocol. If SLIP is being used, click the PPP Enable option to disable PPP, then
click the SLIP Enable option. Determine if the TCP header is going to be compressed using VJC
compression. If VJC compression is used, click the CSLIP (Van Jacobson Compression) option.
The Point-to-Point Advanced tab contains options which control echo request, message printing, and
termination and configuration requests.