Specifications, Ethernet Port | Multi-Tech Systems MTASR1-100

Chapter 1 - Introduction and Description

Specifications

The RouteFinder conforms to the following specifications.

•Routing Protocols - IP and IPX and bridging for all others

•Ethernet LAN Interface - 10Base-T (twisted pair) or 10Base2 (ThinNet) BNC

•WAN Interface - 1 async or sync link (RS-232C/V.35)

•Command Port - 19.2 Kbps Asynchronous

•Two 4-megabyte DRAMs (1 meg by 36 bytes at 70 nanosecond SIMMs)

Caution: SIMM speed and size cannot be mixed.

•1 MB of Flash memory

Ethernet Port

•One Ethernet Interface - 10Base-T (twisted pair) RJ-45 connector or 10Base2 (ThinNet) BNC connector.

Command Port

•Single 19.2 Kbps asynchronous Command Port using a short RJ-45 to DB25 cable with a female connector.

WAN Link

•115.2 Kbps asynchronous WAN link or T1 (1.544 Mbps) sync link using DB25 male connector. Optional ITU-T V.35 interface using a V.35 adapter cable.

Electrical/Physical

•Voltage - 115 VAC (Standard), 240 Volts AC (Optional)

•Frequency - 47 to 63 Hz

•Power Consumption - 10 Watts

•Dimensions - 1.625" high x 6" wide x 9" deep

0.63cm high x 2.34 cm wide x 3.51 cm deep

•Weight - 2 pounds (.92 kg)

MTASR1-100

11

Image 11

Multi-Tech Systems MTASR1-100 manual Specifications, Ethernet Port, Command Port, WAN Link, Electrical/Physical

Contents

User Guide Patents User GuideRecord of Revisions Revision Description Contents Glossary of Terms Index Introduction and Description Preview of this Guide Introduction Introduction and Description Remote Configuration and ManagementService, Warranty and Tech Support Related Documentation WAN Link Front Panel Back Panel Shunt Positions Shunts WAN Link SpecificationsCommand Port Ethernet Port MTASR1-100 Installation Unpacking Unpacking Changing Shunt Position Installation Back Panel Connections Cabling your RouteFinder Software Loading and Configuration Loading your Software Do you want to download default setup? dialog is displayed Software Loading and Configuration Novell IPX Protocol Default Setup dialog box is displayed Software Loading and Configuration RouteFinder MTASR1-100 User Guide Setting Up Your Remote User Database Call Back User PasswordCall Back Security Enabled Call Back Delay RouteFinder Software Before You Begin Download Default Setup Download Firmware Configuration Port SetupWAN Device Configuration Uninstall IP Port Setup Router Configuration RouteFinder Software MTASR1-100 Open Shortest Path First Ospf IPX Setup RouteFinder Software Spanning Tree Setup WAN Port Setup Point-to-Point Setup Frame Relay Setup Frame Relay Dlci Diagnostics Applications Setup Scripting Remote Configuration and Management Modem-Based Remote Configuration Procedure Remote Configuration and Management Windows Sockets Compliant TCP/IP Stack LAN-Based Remote Configuration Remote Configuration and Management Telnet Remote Management Router Management WEB Browser Management Service, Warranty and Tech Support On-line Warranty Registration Limited Warranty Recording RouteFinder Information Service, Warranty and Tech SupportTech Support Service If you know the file name Multi-Tech BBSTo log on to the Multi-Tech BBS To Download a file About the Internet About the Multi-Tech Fax-Back Service Appendixes 10BASE-T RJ-45 10BASE 2 BNC LAN Cables Link Cable WAN CablesAppendixes RS232C/V.24 * Link Cable Script Language Grammar Appendix B Script Language Operator Precedence Two basic types of variables are supportedThere are two types of conditional constructs There are two types of iterative constructs Example Script Industry Canada EMC and Safety Directive ComplianceAppendix C Regulatory Information Class a Statement FCC Part TCP/IP Appendix D TCP/IP Appendixes Internet Protocol IP Glossary of Terms MTASR1-100 Glossary MTASR1-100 Glossary MTASR1-100 Glossary MTASR1-100 Glossary MTASR1-100 Glossary Subscriber Loop See Local loop Glossary MTASR1-100 Index Index Software