RouteFinder MTASR1-100 User Guide
MTASR1-100
34
Spanning Tree Setup
When Bridging is enabled, the Spanning Tree Setup dialog box controls simple transparent
bridging between two remote Ethernet LANs. However, if your internetwork contains any loops or
redundant links, then the Spanning Tree Algorithm must also be enabled. If you use only the IP
and IPX protocols, leave bridging disabled to allow the RouteFinder to operate more efficiently.
The RouteFinder defaults with one logical WAN port mapped to a DLCI. In most applications, the
forwarding state should be enabled. When required, the RouteFinder will make the transition from
blocking to forwarding automatically.