RouteFinder
Note: Clicking No prevents the defaults from being downloaded to the RouteFinder. You are returned to the program manager, and in Windows 95/NT you will see an open window with shortcut icons for all the various utility programs provided in the RouteFinder software.
12.The “Router is Running. Reboot to download setup?” dialog is displayed.
Click Yes.
13.The Novell IPX Protocol Default Setup dialog box is displayed.
Note: To configure your RouteFinder, you will use a series of dialog boxes
14.If your network protocol is IPX, continue with the following steps. However, if your network protocol is IP, click the IPX Routing Enable check box to disable IPX, then click OK and proceed to step 19.
15.Router Name: If this is the only RouteFinder on your network, you can use the default Router Name (MTROUTER); otherwise, you must assign a new Router Name in this field. The Router Name can be any printable ASCII string of up to 47 characters. The RouteFinder will use this name to advertise its service in the IPX internetwork.
16.Ethernet: You can enable Auto Learn Ethernet Network Numbers by leaving the default (Yes) checked, or you can manually assign the network numbers after disabling the Auto Learn option by clicking No. If no file server is connected to the Ethernet segment, then you should select No.
If you enable Auto Learn, the RouteFinder will learn the IPX network numbers from the file server.
If you disable Auto Learn, record in the space below the network numbers assigned by the network file server for each of the four frame types [(Raw (802.3), LLC (802.2), EthernetII (Type II), and SNAP]. Also record the Network number for WAN 1.
RAW (802.3) Frames Network Number _____________
LLC (802.2) Frames Network Number ______________
TYPE_II Frames Network Number _________________
SNAP Frames Network Number ___________________
WAN Network Number _________________________
20 |
|
