For more information visit: www.EatonElectrical.com
Control commands for EZ700
MN05013001E92
Table 42: Error codes
Error
code Description
0x01 Unknown telegram transmitted.
0x02 Unknown object transmitted.
0x03 Unknown command transmitted.
0x04 Invalid instance transmitted.
0x05 Invalid parameter set transmitted.
0x06 An attempt was made to write to a variable that is not
a constant.
0x0C The device is in an invalid device mode. STOP l RUN
or RUN l STOP
0x0D Invalid display access. Exit the menu level so that the
status display is showing in the display. The clock
cannot be written to.
0xF0 Attempt made to control an unknown parameter.
0xF1 Impermissible value