Eaton Electrical EZ204-DP user manual 148

EZ800/EZD Control Commands

	Table 81:	Operand overview
Index	Operand			Read	Write
(hex)
00	Bit IO, J Table 82		×
01	Mode, J Table 83			×
02	Setpoint: –32768 to +32767	I1		×	c1
03	Actual value: –32768 to +32767	I2		×	c1
04	Proportional gain	KP	×		c1
	[%], Value range: 0 to 65535

05

06

07

Reset time [0.1 s], Value range: 0 to 65535	TN		×	c1
Rate time [0.1 s], Value range: 0 to 65535	TV		×	c1
Scan time = Time between function block calls.	TC	×		c1
Value range: 0.1s to 6553.5s.
If 0 is entered as the value, the scan time will be determined
by the program cycle time.

08	Manual manipulated variable, value range: –4096 to +4095	MV		×	c1
09	Manipulated variable	QV	×

•Mode: UNI, value range: 0 to +4095 (12 bit)

•Mode: BIP, value range: –4096 to +4095 (13 bit)

1)The value can only be written if it is assigned to a constant in the program.

J

The data for index 2 and 9 is transferred as a 32-bit value in Intel format (Data 1 – Low Byte .. Data 2 - High Byte).

148 For more information visit: www.EatonElectrical.com MN05013001E