For more information visit: www.EatonElectrical.com
Control commands for EZ700
MN05013001E82
Table 33: Operand overview
Index
(hex) Operand Read Write
00 Parameters JTable34 ×
01 Control byteJTable 35 ×
02 Actual value 1 T×c1
03 Time setpoint 1 S12×c1
04 Time setpoint 2 S22×c1
1) The value can only be written if it is assigned to a constant in the
program.
2) A 16-bit value is transferred in data bytes Data 1 –Data 2. It should be
remembered that Data 1 is the low byte and Data 2 the high byte.