For more information visit: www.EatonElectrical.com
Control commands for EZ700
MN05013001E74
Table 24: Operand overview
Index
(hex) Operand Read Write
00 Parameters JTable25 ×
01 Control byteJTable 26 ×
02 Comparison value 1 I12×c1
03 Comparison value 2 I22×c1
04 Gain factor for I1
(I1 = F1 × I1) F12×c1
05 Gain factor for I2
(I2 = F2 × I2) F22×c1
06 Offset for value I1 (I1 = OS +
actual value at I1) OS2×c1
07 Switching hysteresis for
value I2 HY2×c1
1) The value can only be written if it is assigned to a constant in the
program.
2) A 16-bit value is transferred in data bytes Data1 – Data2. It should be
remembered that the low byte 1 is in Data 1 (Byte 5) and the high byte
2 (byte 8) in Data 2.
Example: 5327dec = 14CFhex l Data1 = 0×CF, Data 2 = 0×14