Chapter 3 – Using the Web Management Software
Daylight Saving Start Time
Start Ordinal: Set the start ordinal to use during Daylight Saving mode. Options are first/second/third/fourth/last. Default is first.
| Daylight Saving time usually starts at the same time on the same day of the week in the |
| same month every year. Each day of the week occurs four or five times a month. |
| Therefore, you will be selecting the week in which daylight saving time starts: the first, |
| second, third, fourth or the last of the month. In the U.S.A., daylight saving time starts at |
| 2:00 a.m. on the first Sunday in April. |
Start Month: | Set the start month to use during Daylight Saving mode. Default is April. |
Start Day: | Set the start weekday to use during Daylight Saving mode. Default is Sunday. |
Start Time: | Set the start time to use during Daylight Saving mode. Default is 02:00 (hh:mm). |
Daylight Saving End Time
End Ordinal: Set the end ordinal to use during Daylight Saving mode. Select the week in which daylight saving time ends. Options are first/second/third/fourth/last. Default is last.
End Month: Set the end month to use during Daylight Saving mode. Default is October.
End Day: Set the end weekday to use during Daylight Saving mode. Default is Sunday.
End Time: Set the end time to use during Daylight Saving mode. Default is 02:00 (hh:mm).
Submit Button
Click the Submit button to save these settings. Note: You must click Save and Restart once you have completed and submitted all the screens on which you have made changes.
IP Setup > Static Routes
Routing information is used by every computer connected to a network to identify whether it is sending a data packet directly to the firewall or passing it on to another network. The options to Delete or Edit a route after it has been defined and added are available by using the table at the bottom of the screen.
Add Static Routes
Static Route: Select a static route from the drop down list box, and then click the Add button.
Add Button: After clicking the Add button, the new route is added and will display at the bottom of the screen.
Important Note:
The Static Route screen will not display until the network is defined under Networks & Services.
26 |
